Re: Upgrade from Vertica 6.1 to Vertica 7.0
Posted: Tue Aug 12, 2014 10:20 pm
Hi,
I also am having difficulty upgrading from vetica6 to 7. These are the messages:
HINT (S0151): https://my.vertica.com/docs/7.0.x/HTML/ ... shid=S0151
These disks do not have known IO schedulers:
'/dev/mapper/VolGroup00-LogVol00' ('dm-0') = ''
HINT (S0231): https://my.vertica.com/docs/7.0.x/HTML/ ... shid=S0231
dbadmin user ('dradmin') primary group is not verticadba ('verticadba')
HINT (S0305): https://my.vertica.com/docs/7.0.x/HTML/ ... shid=S0305
TZ is unset for dradmin. Consider updating .profile or .bashrc
HINT (S0040): https://my.vertica.com/docs/7.0.x/HTML/ ... shid=S0040
Could not find the following tools normally provided by the pstack or
gstack package: pstack/gstack
HINT (S0045): https://my.vertica.com/docs/7.0.x/HTML/ ... shid=S0045
Could not find the following tools normally provided by the sysstat
package: mpstat, iostat
WARN (S0170): https://my.vertica.com/docs/7.0.x/HTML/ ... shid=S0170
lvscan (LVM utility) indicates some active volumes.
FAIL (S0020): https://my.vertica.com/docs/7.0.x/HTML/ ... shid=S0020
Readahead size of dm-0 (/dev/mapper/VolGroup00-LogVol00) is too low for
typical systems: 256 < 2048
This FAIl at the end is the one in question. The only dm-0 I have is located here:
/sys/block/sda/sda2/holders/dm-0:
-r--r--r-- 1 root root 4096 Aug 8 18:11 dev
drwxr-xr-x 2 root root 0 Aug 8 18:11 holders
-r--r--r-- 1 root root 4096 Aug 8 18:11 range
-r--r--r-- 1 root root 4096 Aug 8 18:11 removable
-r--r--r-- 1 root root 4096 Aug 8 18:11 size
drwxr-xr-x 2 root root 0 Aug 8 18:11 slaves
-r--r--r-- 1 root root 4096 Aug 8 18:11 stat
lrwxrwxrwx 1 root root 0 Aug 8 18:11 subsystem -> ../../block
--w------- 1 root root 4096 Aug 8 18:11 uevent
I executed this command for the sda device (also on the other 2 devices I have, sdb and sdc):
/sbin/blockdev --setra 2048 /dev/sda
/sbin/blockdev --getra /dev/sda gives me:
2048
So how do I change dm-0?
Thanks in advance,
Joe
I also am having difficulty upgrading from vetica6 to 7. These are the messages:
HINT (S0151): https://my.vertica.com/docs/7.0.x/HTML/ ... shid=S0151
These disks do not have known IO schedulers:
'/dev/mapper/VolGroup00-LogVol00' ('dm-0') = ''
HINT (S0231): https://my.vertica.com/docs/7.0.x/HTML/ ... shid=S0231
dbadmin user ('dradmin') primary group is not verticadba ('verticadba')
HINT (S0305): https://my.vertica.com/docs/7.0.x/HTML/ ... shid=S0305
TZ is unset for dradmin. Consider updating .profile or .bashrc
HINT (S0040): https://my.vertica.com/docs/7.0.x/HTML/ ... shid=S0040
Could not find the following tools normally provided by the pstack or
gstack package: pstack/gstack
HINT (S0045): https://my.vertica.com/docs/7.0.x/HTML/ ... shid=S0045
Could not find the following tools normally provided by the sysstat
package: mpstat, iostat
WARN (S0170): https://my.vertica.com/docs/7.0.x/HTML/ ... shid=S0170
lvscan (LVM utility) indicates some active volumes.
FAIL (S0020): https://my.vertica.com/docs/7.0.x/HTML/ ... shid=S0020
Readahead size of dm-0 (/dev/mapper/VolGroup00-LogVol00) is too low for
typical systems: 256 < 2048
This FAIl at the end is the one in question. The only dm-0 I have is located here:
/sys/block/sda/sda2/holders/dm-0:
-r--r--r-- 1 root root 4096 Aug 8 18:11 dev
drwxr-xr-x 2 root root 0 Aug 8 18:11 holders
-r--r--r-- 1 root root 4096 Aug 8 18:11 range
-r--r--r-- 1 root root 4096 Aug 8 18:11 removable
-r--r--r-- 1 root root 4096 Aug 8 18:11 size
drwxr-xr-x 2 root root 0 Aug 8 18:11 slaves
-r--r--r-- 1 root root 4096 Aug 8 18:11 stat
lrwxrwxrwx 1 root root 0 Aug 8 18:11 subsystem -> ../../block
--w------- 1 root root 4096 Aug 8 18:11 uevent
I executed this command for the sda device (also on the other 2 devices I have, sdb and sdc):
/sbin/blockdev --setra 2048 /dev/sda
/sbin/blockdev --getra /dev/sda gives me:
2048
So how do I change dm-0?
Thanks in advance,
Joe